HOME > Level meter (continuous type) > Capacitance level meter MHL-R1

Capacitance type level meters

GR-120
MHL-R1 type
Non-contact, continuous level measurement of liquid in a gauge tube, or test tube.

This meter allows you to measure the liquid level in gauge tubes (glass, plastic tubes), or small container continuously, without contact. Can be easily to desorption (installation and removal) of the sensor unit in the narrow mount site.
After the device is installed, the liquid level can also be checked by examining the glass tube.

  • For liquid

By a mechanism was devised, can be simple desorption of the sensor unit, and stable measurement. Also, no-need to install the float in the glass tube. (Patented)

 

Features, keys

  1. Thanks to high precision capacitance measurement, this meter allows the measurement of liquid levels without contact.
    If you install two electrodes at two positions each other on a glass surface, the level meter will converts the liquid level capacitances between these two electrodes, to continuously measure the liquid level.
  2. As this level meter is non-contact, you can use it to measure liquid chemicals that are incompatible with metal.
  3. Can be install and remove easily gauge tube etc..
    If a glass gauge is already installed,the sensor can easy install or remove to a glass gauge, it is exchangeable in the narrow site.
  4. After the device is installed, the liquid level can also be checked by examining the glass tube.
    If a glass gauge is already installed, the meter can output the measured results as electric signals while you check the liquid level visually.
 

Usages, use examples

  • Non-contact level measurement of liquid in a glass tube, small vessel.
  • Non-contact liquid level measurement in a Teflon and plastic tube.
 

Standard specifications

Amplifier

Input power source 20 to 250 V AC/DC
Power consumption 2.0 VA or less
Current output Current output 4 to 20mA/DC (load resistance 500Ω or less)
Response speed
(Delay)
Variable about 0.03 to 30 seconds
Option RS485

Sensor

Outside diameter of adaptation gauge tube Φ18 to Φ20
Material of the holder Aluminum frame + PC
Cable Dedicated coaxial cable (Length Max. 10m)


  Please feel free to inquire us

  • Inquiries
Page Top